EasyManua.ls Logo

Lexmark C78x - Page 173

Lexmark C78x
480 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-129
5061
Load <src> with
<Custom Type
Name>
Load the input source with the correct type and size media.
Cancel the current job.
Load <src> with
<Custom String>
Load <src> <size>
Load <src> <type>
<size>
Menus are Disabled The printer menus are disabled. You cannot change the printer settings from the
operator panel.
Note: You can still cancel a job, print a confidential job, or print a held job.
Contact your system support person.
Network A network interface is the active communication link.
Network <x>
Network <x>, <y> A network interface is the active communication link, where <x> represents the active
communication link, and <y> represents the channel.
No held jobs Wait for the message to clear.
No jobs found
Retry?
Note: The four-digit personal identification number (PIN) you entered is not
associated with any confidential print job.
•Select Retry to enter another PIN.
•Select Cancel to exit the Enter PIN screen.
No jobs to cancel Wait for the message to clear.
No recognized file
types
Wait for the message to clear.
Note: The only supported file type is PDF.
Not ready The printer is offline.
Press
to return to normal operation.
Overflow Bin Full The mailbox’s designated overflow bin is full.
Remove the stack of paper from the bin to clear the message.
Parallel <x> A parallel interface is the active communication link.
Port disabled Remove
USB drive
Wait for the message to clear.
Power Saver Send a job to print.
•Press
to warm the printer to normal operating temperature and display the
Ready message.
Printer locked,
enter PIN to unlock
The operator panel has been locked.
Enter the correct PIN number.
Printing Wait for the message to clear.
Printing from USB
drive
DO NOT REMOVE
Warning: Do not turn the printer off or remove the USB drive while this message is
displayed.
Wait for the message to clear.
Printer busy
Continue
Quit
Press
to read the information from the USB drive.
Select Quit to cancel the information retrieval process.
Programming
System Code
DO NOT POWER
OFF
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear and the printer to reset.
User attendance messages (continued)
User primary
message
Explanation

Table of Contents

Related product manuals