EasyManua.ls Logo

Lexmark T650 Series - Page 103

Lexmark T650 Series
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-67
4062
Go Back
Previous
Next
27x.50
x = bin
number
Left tamper does not
leave home position
failure
Applies to:
Offset stacker
The sensor (left tamper HP)
does not detect that the tamper
has moved from home position.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the left tamper
motor assembly.
Go to “SFP stapler assembly
tamper drive motor
assembly removal on
page 4-181.
4. Replace the sensor (tamper
HP).
Go to “SFP stapler assembly
sensor (tamper HP left and
right) removal” on
page 4-188.
4. Replace the output option if
problem remains.
27x.51
x = bin
number
Sensor (output pass
through) late jam
Applies to:
Mailbox
The media is late reaching the
sensor (output pass through)
within the specified time.
See “Sensor (output pass
through) late jam service
check” on page 2-141
27x.51
x = bin
number
Right tamper does not
leave home position
failure
Applies to:
Offset stacker
The sensor (right tamper HP)
does not detect that the tamper
has moved from home position.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the right tamper
motor assembly.
Go to “SFP stapler assembly
tamper drive motor
assembly removal on
page 4-181.
4. Replace the sensor (tamper
HP).
Go to “SFP stapler assembly
sensor (tamper HP left and
right) removal” on
page 4-188.
4. Replace the output option if
problem remains.
271.52
x = bin
number
Sensor (mailbox
empty) lingering jam
Applies to:
Mailbox
The media reached the sensor
(mailbox empty) but did not
clear it in the specified time.
See “Sensor (mailbox empty)
lingering jam service check”
on page 2-145.
27x.53
x = bin
number
Sensor (mailbox
empty) late jam
Applies to:
Mailbox
The media is late reaching the
sensor (mailbox empty) within
the specified time.
See “Sensor (mailbox empty)
late jam service check” on
page 2-144
Error
code or
message
Error contents Description/Action Possible repair actions

Table of Contents

Other manuals for Lexmark T650 Series

Related product manuals