Lexmark T650 Series - Laser Cover Removal

4-26 Service Manual
4062-XXX
Go Back
Previous
Next
Laser cover removal
1. Remove the output cover assembly. Go to “Output cover assembly removal” on page 4-53.
2. Remove the fuser wiper cover assembly. Go to “Fuser wiper cover assembly removal” on page 4-23.
3. Remove the side cover, left. Go to “Side cover, left removal (T650)” on page 4-64 or “Side cover, left
removal (T652, T654, T656)” on page 4-66.
4. Remove the side cover, right. Go to “Side cover, right removal (T650)” on page 4-66 or “Side cover,
right removal (T652, T654, T656)” on page 4-67.
5. Remove the five screws (A) securing the laser cover to the machine.
WARNING: When removing the laser cover, ensure that the standard bin actuator assembly does not become
damaged.
A
A