4-78 Service Manual
4062-XXX
NVM card assembly removal
WARNING: When replacing any of the following components:
• Operator panel assembly (T650, T652, T654)
• NVM card assembly (T656 only)
• System card assembly (All models)
1. Remove the side cover, left. Go to “Side cover, left removal (T650)” on page 4-64 or “Side cover, left
removal (T652, T654, T656)” on page 4-66.
2. Remove the six screws (A) securing the metal shield to the machine.
3. Slide the metal shiled in the direction of the arrow.
To Next Page
Loading...
