Diagnostic information 2-11
4062
58 Too Many Disks
Installed
This error code displays when
too many disks are attached to
the printer.
1. Turn off and unplug the
printer.
2. Remove the excess disks.
3. Plug in the printer, and turn
it on.
58 Too Many Flash
Options
This error code displays when
too many user flash memory
options or too many optional
firmware cards have been
installed.
User can power off and remove
extra flash options.
1. Turn off and unplug the
printer.
2. Remove the excess flash
memory.
3. Plug in the printer, and turn
it on.
58 Too Many Trays
Attached
This error code displays when
too many input trays are
attached to the printer.
Note: With the RFID option
attached, the maximum
number of trays is three.
Without the RFID option
attached, the maximum
number is four.
1. Turn off and unplug the
printer.
2. Remove the excess trays.
3. Plug in the printer, and turn
it on.
59 Incompatible Duplex An incompatible duplex option
is installed.
Remove the incompatible
duplex option and press
to clear the message.
Note: If the user installed the
incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.
1. Turn off and unplug the
printer.
2. Remove the incompatible
external duplex unit
assembly.
3. Plug in the printer, and turn
it on.
59 Incompatible
Envelope Feeder
An incompatible envelope
feeder is installed.
Remove the incompatible
feeder and press to clear
the message.
Note: If the user installed the
incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.
1. Turn off and unplug the
printer.
2. Remove the incompatible
envelope feeder.
3. Plug in the printer, and turn
it on.
Error
code or
message
Error contents Description/Action Possible repair actions
To Next Page
Loading...
Need help?
General
