Lexmark T650 Series Service Manual

6-2 Service Manual
4062-XXX
Go Back
Previous
Next
Scheduled maintenance
Maintenance kit
The operator panel displays the message 80 Scheduled Maintenance at required maintenance intervals. It is
necessary to replace the fuser assembly, transfer roller, charge roll, and pick tires at this interval to maintain the
print quality and reliability of the printer. The parts are available as a maintenance kit with the following part
numbers:
After replacing the kit, the maintenance count must be reset to zero to clear the “80 Scheduled Maintenance”
message. See “Maintenance page counter reset (Reset Cnt)” on page 3-26.
Description Part number
Maintenance
Interval
Printer maintenance kit (100V) 40X4723 300K
Printer maintenance kit (110V) 40X4724 300K
Printer maintenance kit (220V) 40X4765 300K
Printer maintenance kit (100V type 2 fuser) 40X4766 150K
Printer maintenance kit (110V type 2 fuser) 40X4767 150K
Printer maintenance kit (220V type 2 fuser) 40X4768 150K

Lexmark T650 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 45 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 200, 000 pages
Standard Output Capacity	250 sheets
Processor Speed	500 MHz
Connectivity	USB, Ethernet
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Memory	128 MB, expandable to 640 MB
Standard Input Capacity	650 sheets