Diagnostic aids 3-55
4062-XXX
Paper Prompts
When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting
controls the tray the user is directed to fill.
1. Touch to select Paper Prompts from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2. Touch or to change the value.
The values are Auto (default), Multi-Purpose Feeder, and Manual Paper.
3. Touch Submit to save the change.
Touch Back to exit without changing the value.
Envelope Prompts
This setting controls the tray the user is directed to refill when a specific envelope size is out. The selections
are Auto (default), MP Feeder, and Manual Envelope.
1. Touch to select Envelope Prompts from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2. Touch or to change the value.
The values are Auto (default), MP Feeder, and Manual Envelope.
3. Touch Submit to save the change.
Touch Back to exit without changing the value.
Action for Prompts
1. Touch to select Action for Prompts from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2. Touch or to change the value.
The values are Prompt user (default), Continue, and Use current.
3. Touch Submit to save the change.
Touch Back to exit without changing the value.
Jobs On Disk
If the hard disk is installed, Jobs On Disk allows the user to delete buffered jobs saved on the disk. The values
are Delete and Do Not Delete.
To delete jobs saved on the disk:
1. Touch to select Jobs On Disk from the Configuration Menu.
2. Touch to select Delete to delete buffered jobs saved on the disk.
3. Touch to select Do Not Delete cancel and return to the Configuration Menu.
To Next Page
Loading...
Need help?
General
