NEC Xen Master - Figure 4-58 Connecting the External Power Cables to the PSU; Figure 4-59 Reinstalling the KSU Cover

May 2001
System Hardware Manual 4 - 97
A6-324000-642-01 – Release 4.0 May 2001
3. Connect the external batteries to the KSU in the
location shown in Figure4-16 Connecting the
External Power Cables to the PSU. Connect the
external battery cable to the BATTERY EXT
connector on the PSU of the KSU. Bundle any extra
cabling together.
4. Reinstall the KSU cover. Refer to Figure 4-59
Reinstalling the KSU Cover.
Figure 4-58 Connecting the External Power Cables to the PSU
Figure 4-59 Reinstalling the KSU Cover