NEC Xen Master - Figure 7-26 CTU(S) Connection; Figure 7-27 Base of DTU-Type MLT

May 2001
System Hardware Manual 7 - 211
A6-324000-642-01 – Release 4.0 May 2001
3.5.1.3 Connection
A CTU(S)-UA Unit can support an ESI(8)-U13
ETU connection only.
Required Equipment:
• ESI(8)-U13 ETU
• DTU-type MLT
• CTU(S)-UA Unit
• ACA-U13 Unit (AC Adapter) (not provided)
• USB cable (A to B type) (not provided)
3.5.1.4 Set-up Sequence
Configure the CTU(S) with the DTU-type MLT
as follows.
1. Flip phone upside down.
2. Open DTU-type MLT’s tilt-leg.
Figure 7-26 CTU(S) Connection
Figure 7-27 Base of DTU-type MLT