NEC Xen Master - Securing Cables Using the Velcro Strap; Figure 4-9 Threading the Velcro Strap through the Hook on the KSU; Figure 4-10 Threading the Velcro Strap to Secure One or Two Amphenol Cables

May 2001
System Hardware Manual 4 - 63
A6-324000-642-01 – Release 4.0 May 2001
3.4 Securing Cables Using the Velcro Strap
When attaching the amphenol cables to the side of the KSU, they
can be secured using the provided velcro strap. When wall
mounting, this should be done prior to attaching the KSU to the wall
mount bracket.
1. Thread the velcro strap through the hook on the back side of
the KSU.
2. When one or two amphenol cables are attached to the KSU,
the velcro strap can be threaded around the cable and through
the hooks.
Figure 4-9 Threading the Velcro Strap Through the Hook on the KSU
Figure 4-10 Threading the Velcro Strap to Secure One or Two Amphenol Cables