NEC Xen Master System Hardware Manual

May 2001
System Hardware Manual 6 - 185
A6-324000-642-01 – Release 4.0 May 2001
S
ECTION
3
C
ONNECTING A
M
ULTILINE
T
ERMINAL
TO THE
S
YSTEM
These instructions for connecting a Multiline Terminal to the system applies
to all of the DTU-type Multiline Terminals.
1. Plug the telephone cord into the modular jack on the bottom side of
the Multiline Terminal. The handset is also attached to the bottom
side of the Multiline Terminal.
2. Lead the telephone and handset cords through the appropriate
grooves.
Figure 6-6 Connecting a Multiline Terminal to the System
Figure 6-7 Leading Line Cords on a Multiline Terminal

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English