R&S FSW Series User Manual

Remote Commands
R&S
®
FSW
1299User Manual 1173.9411.02 ─ 43
SYSTem:LXI:MDEScription <Description>
This command defines the LXI instrument description.
Parameters:
<Description> String containing the instrument description.
Manual operation: See "LXI Manufacturer Description" on page 794
SYSTem:LXI:PASSword <Password>
This command defines the LXI password.
Parameters:
<Password> String containing the password.
Return values:
<Password> The query returns the current password.
Manual operation: See "LXI Password" on page 794
SYSTem:REVision:FACTory
Resets the response to the REV? query to the factory default value.
For example, after a user string was defined using the SYSTem:REVision[:STRing]
on page 1334 command. (REV? query available for HP emulation only, see SYSTem:
LANGuage on page 1332.)
Example:
Define the system language:
SYST:LANG '8563E'
Set the response back to factory setting:
SYS:REV:FACT
Query the revision:
REV?
Response:
920528
Usage: Event
Manual operation: See "Resetting the Factory Revision" on page 792
SYSTem:SHIMmediate ONCE
Executes any received remote commands that cause changes to the hardware and
have not been executed yet due to a SYST:SHIM:STAT OFF command.
Example:
SYST:SHIM:STAT ON
...
SYST:SHIM ONCE
Usage: Event
Manual operation: See "Set Hardware Immediately" on page 789
Configuring the R&S FSW

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English