R&S FSW Series User Manual

Common Analysis and Display Functions
R&S
®
FSW
602User Manual 1173.9411.02 ─ 43
Remote command:
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer on page 1138
DISPlay[:WINDow<n>]:SPECtrogram:COLor:UPPer on page 1138
Shape
Defines the shape and focus of the color curve for the spectrogram result display.
"-1 to <0"
More colors are distributed among the lower values
"0"
Colors are distributed linearly among the values
">0 to 1"
More colors are distributed among the higher values
Remote command:
DISPlay[:WINDow<n>]:SPECtrogram:COLor:SHAPe on page 1138
Hot/Cold/Radar/Grayscale
Sets the color scheme for the spectrogram.
Remote command:
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe] on page 1139
Auto
Defines the color range automatically according to the existing measured values for
optimized display.
Set to Default
Sets the color mapping to the default settings.
Remote command:
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault on page 1138
Close
Saves the changes and closes the dialog box.
9.5.2.3 How to Display and Configure a Spectrogram
Step-by-step instructions on how to display and configure a spectrogram are provided
here. For details on individual functions and settings see Chapter 9.5.2.2, "Spectro-
gram Settings", on page 597.
The remote commands required to perform these tasks are described in Chap-
ter 14.8.2.2, "Configuring Spectrograms", on page 1132.
The following tasks are described here:
●
"To display a spectrogram" on page 603
●
"To remove the spectrogram display" on page 603
●
"To set a marker in the spectrogram" on page 603
●
"To configure a spectrogram" on page 603
●
"To select a color scheme" on page 604
●
"To set the value range graphically using the color range sliders" on page 605
●
"To set the value range of the color map numerically" on page 605
Trace Configuration

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English