Ricoh IM 550F

5.SP Mode Tables (for MF Model)
323
Scanner SP Mode
SP1-XXX (System and Others)
1001
[Scan Nv Version]
Operates automatic initialization to ensure that scanner NV is initialized if necessary. To do
this SP, specify the version of scanner NV within 9 characters.
“Function name”_”Machine code”_”Serial number”
- Function name: Enter “3”.
- Machine code: Enter the machine code with three characters.
- Serial number: Enter the number (default: 001).
1-001-
005
-
CTL*
-
1005
[Erase margin]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This SP is activated
only when the machine uses TWAIN scanning.
1-005-
001
Range from 0 to 5 mm
CTL*
[0 to 5 / 0 / 1 mm]
1009
[Remote scan disable]
Enable or disable remote scan.
1-009-001
0:Enable 1:Disable
CTL*
[0 or 1 / 0 / - ]
0: enable, 1: disable
1010
[Non Display Clear Light PDF]
Enable or disable remote scan.
1-010-001
0:Enable 1:Disable
CTL*
[0 or 1 / 0 / - ]
0: Display, 1: No display
1011
[Org count Disp]
Selects the original counter display.
0: Displays remaining memory for the original scanning.
1: Displays original counter.
1-011-001
0:ON 1:OFF
CTL*
[0 or 1 / 0 / - ]
1012
[UserInfo release]
Clear the following settings: