7.Detailed Descriptions
697
Pop-ups appear in the Bypass Tray settings assistant:
• After pressing the Bypass Tray setting button on the Copier (Classic), Easy Copy, Quick Copy, and
Document Server screens.
• If the pop-up displays have been enabled to open for Copier (Classic), Easy Copy, Quick Copy,
and Document Server screens when the paper is set in the bypass tray. *
1
• When the [Delete] button is pressed on the paper size mismatch screen
*1: Whether the pop-ups are enabled/disabled to appear when the paper is set in the tray depends on
the following setting: Home > Settings > Machine Features Settings > Copier/Document Server
Features > General Features tab > Paper Settings Screen for Bypass (Default: Display Automtcly.)
However, the pop-ups do not appear when:
• A copy job is in progress
• A system dialog screen is open
• A machine status check screen is open
• A job stop screen is open
Setting the paper by the Bypass Tray Assist Paper Function
The Bypass Paper Setting screen opens when you select the paper setting for the bypass tray with the
copy application, or after pressing the [Change Setting] button on the Settings screen when the paper is
loaded in the Bypass Tray.
1. Select the paper type, and then press [Next].
When changing the paper thickness in Plain Paper, select the paper thickness.
To Next Page
Loading...
