Ricoh IM 550F

4.Replacement and Adjustment
227
Scanning (IM 550F/600F/600SRF Only)
• Before doing the following scanner adjustments, perform or check the printing
registration/side-to-side adjustment and the blank margin adjustment.
Registration: Platen Mode
A: Side-to-side Registration (Main Scan Reg)
1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the side-to-side registration, and adjust it using the following SP mode if necessary.
SP No.
SP Name
Adjustment Range
SP4-011-001
Main Scan Reg
±2.5 mm
DF Image Adjustment (IM 550F/600F/600SRF Only)
Registration
A: Side-to-side Registration
1. Place the temporary test chart on the DF and make a copy from one of the feed stations.
2. Check the registration, and adjust them using the following SP modes if necessary.
SP No.
SP Name
Adjustment Range
SP6-006-001
ADF Adjustment Side-to-Side Regist: Front
±3.0 mm