Ricoh IM 550F

2.Installation
31
12. Press [OK].
13. Turn OFF/ON the main power.
Settings According to the Service Contract
Change the necessary settings depending on the customer's service contract.
Meter Click Charge
There are two ways to set up this function.
• Meter click charge enabled (SP5-930-001 set to "1 (enabled)"; this is the default setting): The
counter can be displayed and printed by the customer. The service representative can then call the
customer and ask for the counter.
• Meter click charge disabled (SP5-930-001 set to "0 (disabled)"): The counter cannot be
displayed or printed by the customer. To check the counter, the service representative must print
the SMC report (SP 5-990).
Item
SP No.
Function
Default
Meter Click Charge
SP5-
930-001
Enables or disables Meter Click Charge.
When enabled:
• The counter menu shows immediately after
you push the "Menu" key.
In IM 550F/IM 600F/IM 600SRF, "Counter
Method" (SP5-045-001) sets the type of the
counter.
• You can print the counter from the counter
menu.
When disabled:
• The counter menu does not show.
1: ON
Meter Click Charge:
Maintenance Kit
SP5-
931-001
Enables or disables the PM alert for the
maintenance kit.
* This setting is unnecessary with this machine
1: No alert