Ricoh IM 550F

2.Installation
52
Optional Counter Interface Unit Type M12 (IM
550F/600F/600SRF Only)
Accessory Check
No.
Description
Q’ty
1
MKB board
1
2
Tapping screw: M3x6
4
3
Cable tie
1
4
Plastic standoff
4
5
Harness clamp: LWS-0711
1
6
Harness
1
-
EMC address decal
1
Installation Procedure (IM 600SRF)
Turn OFF the main power, and unplug the machine power cord before starting the following procedure.
1. Open the rear upper cover [A].
2. Release the hook by opening the right side of the cover, and then remove the cover [A] by rotating