Ricoh IM 550F

4.Replacement and Adjustment
230
Factory SP Settings
This section provides the factory SP settings.
You can check the factory SP settings with the SMC report provided with the machine. The SMC report
is stored in the paper feed tray. (For details, see SMC Storage)
If the SMC report is not stored with the machine, refer to the tables in this section.
IM 550F/600F/600SRF
SP
No.
SP Name
Default Value
Factory Setting
SP1-
001-
001
Registration Correct: Main
+0.0 mm
-- mm
*1
SP1-
001-
006
Registration Correct: By-
Pass Tray
+0.0 mm
-- mm
*1
SP1-
001-
007
Registration Correct:
Duplex
+0.0 mm
-- mm
*1
SP1-
002-
001
Registration Correct: Main
+0.0 mm
-- mm
*1
SP1-
002-
006
Registration Correct: By-
Pass Tray
+0.0 mm
-- mm
*1
SP1-
002-
007
Registration Correct:
Duplex
+0.0 mm
-- mm
*1
SP4-
011-
001
S-to-S Regist Adjustment
+0.0 mm
-- mm
*1
SP4-
108-
001
Sub Scan
Speed.Adjustment
+0.0 %
-- %
*1
SP4-
110-
001
L-Edge Timing Adjustment
+0 pulse
-- pulse
*1
SP4-
609-
Gray Balance Set: R: Book
Scan
-100 digit
-- digit
*1