OSC stands for Operating Control Service. It is a module that controls the
control panel. The set of signals used by this module to control the control
panel are called the OCS Library.
It is used during communication between the Legacy UI (system) module
on the Smart Operation Panel and the GW module for the following
processes.
• Deciding on the display format suitable for a particular model of the
control panel, so that the intended image data can be converted to
actual image data.
• Converting touch panel operations to commands.
Flair is the manufacturer's own communication interface between software
modules. The interface uses a generic WebAPI.
It is divided into two parts: a part that communicates directly with
To Next Page
Loading...
