5.System Maintenance
466
The figures at the lower right of the display indicate "Number of updated items/ All items to be
updated".
8. Turn the main power OFF.
9. Remove the removable media from the slot on the operation panel.
10. Turn the main power ON again, and check whether the machine is operating normally.
Using the Slot on the Operation Panel (Reserve)
Firmware update can be executed at the programmed date and time.
1. Enter the SP mode.
2. Touch [Firmware Update].
3. Touch [Media Update].
4. When the following screen is displayed, insert the removable media into the slot on the operation
panel and touch [OK].
To Next Page
Loading...
