6.Software Configuration
341
Bit 0 = 0
Bit 1 = 1
Bit 7 = 1
As Bit 1 = 1 is the most restrictive of the three, it will take precedence over the other two and only
administrators will be able to access the DS via WIM.
In order for SP5-885-020 to have any effect, the Document Server must be enabled (SP5-967-
001=0). For information about SP5-967-001, refer to Disabling the Document Server using
System SP5-967-001 and Printer SP1-006-001.
Access to the entire "Job" menu can be restricted using SP 5-888-001. For details, refer to
Use of SP 5-888-001 to restrict access to the "Job" menu on WIM.
User Authentication for Specific MFP Applications (IM 550F/600F/600SRF only)
The SP5-420 settings enable/disable User Authentication for specific MFP applications.
SP 5-420 User Authentication Value (Default: 0)
1. Enable User Authentication for the device as a whole:
User Tools > System Settings > Administrator Tools > User Authentication Management
2. Use the SP5-420 settings to specify the applications to which User authentication is to apply.
To Previous Page
Loading...
