6.Troubleshooting
633
12. Remove the knockout [A] of the left rear cover [B] with a pair of nippers.
13. Pass the harness as shown below and reattach the left rear cover.
By default, the smell reduction fan (FAN5) stops operating 15 seconds after printing operation finishes.
If further smell reduction is necessary, use SP3-906-001 to configure the time it takes for the fan to
stop.
• SP3-906-001 (Range: 15 - 240 (seconds), default: 15)
Adjusting the Finisher Side-to-Side Registration
See Finisher Side-to-Side Registration Adjustment.
Small sized jammed paper cannot be removed (jam code: 001) (IM 600SRF only)
Symptom
A sheet of A5 LEF-, A6 SEF-, or B6 SEF-size paper is jammed inside the internal finisher (jam code:
001) and it cannot be removed from the finisher output tray or from the rear cover side.
Solution
Rotate the paper removal knob [A] to move the jammed paper.
To Next Page
Loading...
