5.System Maintenance
464
6. Turn the main power OFF.
7. Remove the SD card.
8. Turn the main power ON again, and check whether the machine is operating normally.
9. Return the SD card slot cover to the original position.
Using the Slot on the Operation Panel (Immediate Update)
The update may fail if the machine's System/Copy version is V1.04 or an older version. If this happens,
use the update procedure described in "Using the Slot on the Back of the Machine" above.
1. Enter the SP mode.
2. Touch [Firmware Update].
3. Touch [Media Update].
4. When the following screen is displayed, insert the removable media into the slot on the operation
panel and touch [OK].
To Next Page
Loading...
