Ricoh IM 550F

6.Troubleshooting
618
7. Select [General Settings] -> Press [OK]
8. Select the paper thickness setting for the specified paper type -> Press [OK]
9. Select the tray where the specified type of paper is loaded -> Press [OK] If you selected
[Letterhead Setting], [Label Paper Setting], or [Envelope Setting] in Step 8, you can specify the
paper thickness for each tray separately. For other paper types, the specified paper thickness
is applied to all trays.
10. Change the paper type setting to thicker -> Press [OK]
Paper Transport
Paper jam occurred in the paper path between Tray 1 and around the registration roller
Symptom
The paper jam (such as J031, J054, J057, J069) occur in the paper path between Tray 1 and around
the registration.
Solution
Clean the registration sensor 1 (S13) and the opposing part.
1. Open the front cover.
IM 550F/600F/600SRF: Push the button [A] and open the front cover [B].
P 800/801: Open the upper cover [A], and then open the front cover [B].