Ricoh IM 550F

4.Replacement and Adjustment
398
14. Pass the flat cable [A] through the cores [D].
15. Fold the flat cable by aligning the edge of the cable with the black line [A].
16. Fold the flat cable along the edge [B].
17. Set the cores [A] in the holder and connect the flat cable to the BiCU (PCB16) [B].
Flat Cable between DF and BiCU (PCB16) (IM 550F/600F)
1. Pass the flat cable through the hole [A].
2. Fold the flat cable along the red line [B].
3. Pass the flat cable through the hole [C].
Do not fold the flat cable in the [D] area.