Example: Time and date/Counter
information/Installation date
#3. Setting values for the Engine
Secret information is exported if
you select the "Secret" setting.
Secret information
#1. Data that cannot be exported without being
encrypted.
(Exported data is encrypted.)
Example: Password/Encryption key/PIN code
#2. Confidential information for the customer
Example: User name / User ID / Department code /
Mail address / Phone number
#3. Personal information
Example: Document name / Image data
#4. Sensitive information for the customer
Example: MAC address / Network parameters
* The IP address is exported when both 'Unique' and 'Secret' are selected.
6. Select "Crypt config" setting (Encryption).
Select whether to encrypt or not
when exporting.
If you push the "Encryption" key,
you can export secret information.
If the encryption function is used, the setting
of an encryption key is required by direct
input.
• Type the arbitrary password using the soft
keyboard
• Can enter up to 32 characters
7. Press [EXECUTE].
8. Press [OK].
• If data export fails, the details of the error can be viewed in the log.
Importing Device Information
Import device information saved on an SD card.
1. Insert an SD card into the media slot on the side of the operation panel.
2. Enter SP mode.
3. Press SP5-749-101(Import/Export: Import)
4. Select a unique setting.
5. Press [Encryption Key], if the encryption key was created when the file was exported.
6. Select an encryption setting.
If you want to apply the unique information to the target
machine, select the "Unique" key.
Refer to the above
information.
To Next Page
Loading...
