8.Smart Operation Panel G2.5
748
Forced Uninstallation
If you try to uninstall an activated application without first deactivating it, the uninstallation will fail.
However, the application can be uninstalled without deactivation (forced uninstallation) in the following
circumstances:
• Uninstallation using the service login uninstallation menu
• Deactivation failure due to the license information stored in the control panel not matching the
license information published by the server
• Forced uninstallation cannot be performed if deactivation fails because of other factors (such
as failure to connect to the server because of temporary network disconnection or server
maintenance).
During forced uninstallation, the message indicating that deactivation failed appears.
If [OK] of the message is selected, uninstallation is executed forcibly without deactivation.
If [Cancel] of the message is selected, uninstallation is not executed.
• If executing forced uninstallation, forced deactivation must also be executed on the eDC
server. Accordingly, check whether the license has been published for the eDC server.
Application Site
"Application Site" has been added to Screen Service mode. Field engineers can start up Application
Site to install or update applications or firmware without needing user administrator credentials.
This menu item opens Application Site by using the Web Browser NX app.
To Next Page
Loading...
