2.Installation
18
extremely large number of copies, the smell may become unpleasant. To maintain the appropriate
environment for copy work, it is suggested that the room should be properly ventilated.
Machine Level
Front to back: Within 5 mm (0.2") of level
Right to left: Within 5 mm (0.2") of level
Minimum Space Requirements
Place the machine near the power source, and provide clearance as shown:
1. Rear: Over 300 mm (11.9")
2. IM 550F/600F, P 800/801: Right: Over 100 mm (3.9")
IM 600SRF: Right: Over 300 mm (11.9")
3. Front: Over 500 mm (19.7")
4. Left: Over 300 mm (11.9")
5. Top: Over 400 mm (15.7")
• The 500 mm clearance for the front is only for pulling out the paper tray. If an operator stands
in front of the machine, more space is required.
Machine Dimensions
IM 550F/600F/600SRF
To Next Page
Loading...
