Ricoh IM 550F

3.SP Mode Tables (Common for both MF Model and Printer Model)
31
Printer Service Mode
Printer Service Mode
1001
[Bit Switch]
Values
1-
001-
001
Bit Switch 1
0
1
bit
0
DFU
-
-
bit
1
sysName Value
Model
name
(PnP
name)
Hostname
This BitSw can switch the value of the sysName of the
standard MIB.
bit
2
DFU
-
-
bit
3
I/O Timeout
Enabled
Disabled
Enables/Disables MFP I/O Timeouts. If disabled, the MFP I/O
Timeout setting will not be in effect. I/O Timeouts will never
occur.
bit
4
SD Card Save Mode
Disabled
Enabled
This BitSw enables the SD card save mode setting menu to
be displayed.
After enabling this BitSw, the Card Save settings will appear
under:
"User Tools > Machine Features >Printer Features > List/Test
print"
bit
5
Paper Size Error Margin
±5pt
±10pt
When a PS job is printed on a custom paper size, the job
might not print because of a paper size mismatch caused by
a calculation error. This BitSw can set the allowable margin of
error value. Note:This is available for PS, PDF only.
bit
6
DFU
-
-
bit
7
Printable Area Frame Border
Disabled
Enabled
Prints all RPCS and PCL jobs with a border around the
printable area. Note:This is available for PCL, RPCS only.
1001
[Bit Switch]
Values
1-001-
002
Bit Switch 2
0
1
bit
DFU
-
-