Ricoh IM 550F

3.SP Mode Tables (Common for both MF Model and Printer Model)
32
1001
[Bit Switch]
Values
0
bit
1
DFU
-
-
bit
2
Collation Type
Shift
Collation
Normal
Collation
The type of collation will be applied to a job when the job
does not explicitly define a collation type. (IM 600SRF
only)
Note: If #5-0 is enabled, this BitSw has no effect.
bit
3
PDL Auto Switching
Enabled
Disabled
Enables/Disables the MFPs ability to switch the PDL
processor when receiving a job which contains both PS
andPCL5e/c.
bit
4
DFU
-
-
bit
5
DFU
-
-
bit
6
DFU
-
-
bit
7
DFU
-
-
1001
[Bit Switch]
Values
1-001-
003
Bit Switch 3
0
1
bit
0
DFU
-
-
bit
1
DFU
-
-
bit
2
Legacy HP Compatibility
Disabled
Enabled
Uses the same left margin as older HP models such as
HP4000/HP8000.
This setting enables the starting position of the graphics in the
job to be changed.
If this BitSw is enabled, the left margin command of
"<ESC>*r0A" will be conducted as "<ESC>*r1A".
PCL command are bellow:
- <Esc> *r0A ->Start Graphics at X coordinate of Zero
- <Esc> *r1A ->Start Graphics at Current Cursor