Ricoh IM 550F

5.System Maintenance
524
11. Press [Exit] to exit from SP mode.
P 800/801
1. Turn OFF the main power.
2. Insert the SD card into the SD Card Slot 2 (lower). Then turn ON the main power.
3. Enter the [Engine] in the SP mode (Service).
4. Select SP5-992 (SP Text Mode).
5. Select a detail SP number shown below to save data on the SD card and press [OK].
SP5-992-xxx (SP Text Mode)
Detail No.
SMC Categories to Save
001
All (Data List)
002
SP (Mode Data List)
003
User Program
004
Logging Data
005
Diagnostic Report
006
Non-Default
007
NIB Summary
024
SDK/J Summary
025
SDK/J Application Info
026
Printer SP
6. Press [EXECUTE].
7. Press [EXECUTE] again to start. Press [CANCEL] to cancel the saving.
8. Wait for 2 to 3 minutes until "Completed" is shown.
• The SMC list saving may take from 2 to 3 minutes to complete.
• Press [CANCEL] to abort executing.
9. Press [End] to exit from SP mode.