Ricoh IM 550F

4.Replacement and Adjustment
374
18. Restore the original settings of the following SPs, by referring to the SMC data obtained in step 2.
• SP5-825-001 does not download the following SP data to the new NV-RAM. You must set
them manually.
• SP5-985-001(Device Setting: On Board NIC) (IM 550F/600F/600SRF only)
• SP5-985-002(Device Setting: On Board USB) (IM 550F/600F/600SRF only)
• SP5-193-001 (External Controller Info. Settings)
19. For IM 550F/600F/600SRF, if the security functions (HDD Encryption and HDD Data Overwrite
Security) were applied, set the functions again.
20. Ask the customer to restore their address book. Or restore the address book data using SP5-846-
052 (UCS Setting: Restore All Addr Book), and ask the customer to ensure the address book data
has been restored properly.
• If you have obtained a backup of the customer’s address book data, delete the backup
immediately after the NVRAM replacement to avoid accidentally taking out the customer’s
data.
21. Output the SMC log using one of the following methods:
To print SMC log data, execute SP5-990-001.
To save SMC log data to an SD card, execute SP5-992-001 (SMC List Card Save Function).
• Check that the counters are reset.
22. For IM 550F/600F/600SRF, make sure that the list output in steps 7-1 through steps 7-3 matches
the destination information in the machine. If not, set it to the setting before replacement.
• Try the following if NVRAM upload (SP5-824-001) or download (SP5-825-001) cannot be
done.
• Check the SP values that changed on the SMC you printed out in step 2. Adjust the
values manually. Make sure that the values of SP5-045-001 (IM 550F/600F/600SRF only)
and SP5-302-002 are the same as before replacing.
• If a message displayed that an SD card is needed to restore displays after the NVRAM
replacement, create an "SD card for restoration" and restore with the SD card. Refer to
the following.
• IM 550F/600F/600SRF: Encryption Key Restoration
• P 800/801: Encryption Key Restoration
BiCU (PCB16)
1. Remove the controller board (PCB15) with the BiCU (PCB16) from the controller box.
• IM 550F/600F/600SRF: (Controller Board (PCB15) (IM 550F/600F/600SRF))