Ricoh IM 550F

3.SP Mode Tables (Common for both MF Model and Printer Model)
30
Input and Output Check
Input Check Table (SP5-803)
When entering the Input Check mode, 8 digits display the result for a section. Each digit corresponds to
a different device as shown in the table.
Bit No.
7
6
5
4
3
2
1
0
Result
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
SP
Description
Reading
0
1
5-803-001
Exit Full Sensor
Paper detected
Paper not detected
5-803-016
Key Card Set
Set
Not set
5-803-017
Key Counter Set
Set
Not set
5-803-018
IPU Version
-
-
 SP5-803-200 and SP5-803-201 do not work.
Output Check Table (SP5-804)
Activates the electrical components for functional check.
It is not possible to activate more than one component at the same time.
SP
Display
5-804-001
CTLFAN Motor
5-804-101
FAN:LSU/DLP/CENTER/REAR
5-804-102
FAN:LVU
5-804-103
Toner Motor
5-804-202
Scanner Lamp
5-804-203
ADF Motor