Ricoh IM 550F

8.Smart Operation Panel G2.5
751
Quick Scanner / Web Browser
/ Quick ID Card Authentication Config*
*Depends on the model whether it is a preinstalled application
If an error related to the application occurs, the operation panel’s operating system automatically
restarts the application (with a confirmation dialog box).
Third-Party Application
If using a third-party application, the error message, code, and solution may vary depending on the
application. Follow the third-party vendor’s instructions.
Factory Reset and Restoration
This section explains the Factory Reset and subsequent procedure. Factory Reset may be executed
when an abnormal operation due to the system or an application occurs or when replacing the
operation panel (at the request of the customer to delete settings, etc.)
• When you execute the Factory Reset:
All data created by users will be initialized.
All applications (including the applications from eDC server or Application Site) will be deleted.
Items
Objective
Only delete
data
Reset application
configuration to factory
settings.
Update the system and reset
application configuration to
factory settings.
Exporting configuration
file
-
As required
As required
Storing user information
other than those exported
-
As required
As required
Factory reset
Required
Required
Required
System update
-
-
Required
Application installation
-
Required
Required
Importing configuration
file
-
As required
As required
Registering user
information other than
those imported
-
As required
As required
Before executing Factory Reset, be sure to obtain the package firmware and copy it to the SD card.