Ricoh IM 550F

5.System Maintenance
506
uploaded data with the number of the machine from which the data was uploaded.
• You can upload NVRAM data from more than one machine to the same SD card.
Downloading Contents from the SD Card to NVRAM
Do the following procedure to download SP data from an SD card to the NVRAM in the machine.
• The NVRAM data download may fail if the SD card with the NVRAM data is damaged, or if the
connection between the controller and BiCU (PCB16) is defective.
• Repeat the download process again if it fails.
• If the second attempt fails, do the following procedure:
• Enter the NVRAM data manually using the SMC print you created before uploading the NVRAM
data.
1. Turn OFF the main power.
2. Remove the controller cover. (IM 550F/600F/600SRF: Controller Cover (IM550F/600F), P 800/801:
Controller Cover)
3. Insert the SD card into SD Card Slot 2 (lower) [A].
IM 500F/600F/600SRF
P 800/801
4. Turn ON the main power.
5. Press [Execute] with SP5-825-001 (NVRAM Data Download).
• The serial number of the file on the SD card must match the serial number of the machine
for the NVRAM data to download successfully. The download fails if the serial numbers do