5.System Maintenance
511
• Host Interface
• Web Image Monitor Setting
• Web Service Settings
Data that cannot be imported or exported
• Address book
• Programs (printer function)
• Settings that can be specified via telnet
• RICOH @Remote-related data
• Counters
• Settings that can only be specified via Web Image Monitor or Web Service (for example, Bonjour,
SSDP setting)
• Settings for the date and time
• Settings that require the device certificate
• Settings that need to be adjusted for each printer (for example, image adjustment settings)
• Settings exclusively for executing functions and settings exclusively for viewing
Exporting Device Information
This can be exported/imported by an administrator with all privileges.
When exporting SP device information from the control panel, the data is saved on an SD card.
1. Remove the controller cover. (Controller Cover)
2. Insert the SD card into the SD Card Slot 2 (lower) [A].
3. Turn the main power ON.
4. Press the [Menu] key.
5. Log in from the control panel as an administrator with all privileges.
6. Select [Device Setting Information] -> Press [OK]
7. Select [DevSettgInfo: Exp (MemDev)] -> Press [OK]
8. Select [Device Unique Information] -> Press [OK]
9. Select [Include] or [Exclude] -> Press [OK]
If [Include] is selected, the device unique information (IP address, host name, fax number, etc) is
included in the exporting device information.
To Next Page
Loading...
