Ricoh IM 550F

4.Replacement and Adjustment
395
4. Pass the flat cable through the holes [B] and [C], and then connect it to the BiCU (PCB16).
Flat Cable between DF and BiCU (PCB16) (IM 600SRF)
1. Pass the flat cable [A] through the core [B] and fold it along the black line [C].
2. Fix the core [A] to the bracket using the hooks [B].
3. Fold the flat cable by aligning the edge of the cable with the black line [C].
4. Fold the flat cable by aligning the edge of the cable with the black line [A].