Ricoh IM 550F

4.Replacement and Adjustment
226
Paper Feed Station
SP No.
Adjustment Range
Tray 5 (Optional tray)
SP1-002-005
Bypass Tray
SP1-002-006
Duplex Tray
SP1-002-007
Blank Margin
If the leading edge/side-to-side registration cannot be adjusted within the specifications, adjust the
leading/left side edge blank margin.
A: Left Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Trailing Edge Blank Margin
1. Check the trailing edge [A], right edge [B], leading edge [C], left edge [D] blank margins, and adjust
them using the following SP modes.
Edge
SP No.
Adjustment Range
Left Edge
SP2-103-001
4±2.5 mm
Right Edge
SP2-103-002
Leading Edge
SP2-103-003
Trailing Edge
SP2-103-004
Main Scan Magnification
1. Use SP2-109-003, No.5 (Grid Pattern) to print the single-dot grid pattern.
2. Check the magnification, and adjust the magnification using SP2-102-001 (Magnification
Adjustment Main Scan) if necessary. The specification is ± 1%.