Ricoh IM 550F

6.Troubleshooting
530
Operation during SC reboot
• The timing of SC reboot
When @Remote is enabled, and when an NRS alarm*1 is not generated, the corresponding SC is
the object of an automatic reboot.
*1 NRS alarm: Issued when an ordinary SC (type D) is generated twice while the total counter
counts 10 times.
• Time to automatic reboot
Reboot is performed 30 seconds after an engine reboot is possible, after the end of post-
processing during printing, etc.
At that time, a reboot is performed even if the machine is operating. The engine does not start
process control when a reboot is possible.
• Automatic reboot
See the flowchart below.