Ricoh IM 550F

5.System Maintenance
515
Encryption
If an encrypted file is selected as the import file, this
setting is required.
7. Press [Execute].
8. Press [OK].
• If data export fails, the details of the error can be viewed in the log.
SP Data Import/Export (P 800/801)
Data that can be imported and exported
• Service SP
• Engine SP
Exporting Device Information
When exporting SP device information from the control panel, the data is saved on an SD card.
1. Remove the controller cover. (Controller Cover)
2. Insert the SD card into the SD Card Slot 2 (lower) [A].
3. Turn the main power ON.
4. Enter SP mode.
5. Select SP5-749-001 (Import/Export: Export).
6. If you want to include the unique information in the exported file, select [Unique].
7. Select [Encryption] -> Enter an encryption key. -> Select [Accept]
8. Press [EXECUTE].
9. Press [OK].
• If data export fails, the details of the error can be viewed in the log.
Importing Device Information
Import device information saved on an SD card.
1. Remove the controller cover. (Controller Cover)