Ricoh IM 550F

6.Troubleshooting
581
Service Call 816-899
SC800 (Controller)
No.
Type
Error Name/Error Condition/Major Cause/Solution
SC816-**
[0x0000]
Energy save I/O subsystem error
SC816-01
D
Subsystem error
SC816-02
D
Sysarch (LPUX_GET_PORT_INFO) error
SC816-03
D
Transition to STR was denied.
SC816-04
D
Interrupt in kernel communication driver
SC816-05
D
Preparation for transition to STR failed.
SC816-07
D
Sysarch (LPUX_GET_PORT_INFO) error
SC816-08
D
Sysarch (LPUX_ENGINE_TIMERCTRL) error
SC816-09
D
Sysarch (LPUX_RETURN_FACTOR_STR) error
SC816-10
to 12
D
Sysarch (LPUX_GET_PORT_INFO) error
SC816-13
D
open() error
SC816-14
D
Memory address error
SC816-15
to 18
D
open() error
SC816-19
D
Double open() error
SC816-20
D
open() error
SC816-22
D
Parameter error
SC816-
23, 24
D
read() error
SC816-25
D
write () error
SC816-26
to 28
D
write() communication retry error
SC816-
29, 30
D
read() communication retry error
SC816-35
D
read() error
SC816-36
to 96
D
Subsystem error
SC 816-
98
D
Subsystem error
Energy save I/O subsystem detected some abnormality.
• Energy save I/O subsystem defective
• Energy save I/O subsystem detected a controller board (PCB15) error
(non-response).