2.Installation
24
2. Connect the power cord to the wall outlet.
3. Press the main power switch.
The machine starts up.
4. Following the start screen, the language select screen appears.
Select the language to use, and then press [Next].
5. The administrator password setting screen appears.
If your customer change the password soon, go to step 6.
If you want to skip this screen, go to step 7.
6. Press the [Set Up Now] and then press [Next]. Ask your customer to change the name of the
administrator and the password as follows.
1. Press the [Administrator 1] and the [Password] dialogue boxes, enter the name and the
password respectively.
2. Enter the name and the password again for confirming, and then press [OK] to register them.
To Next Page
Loading...
