4.Replacement and Adjustment
416
16. Disconnect two connectors from the CIS assembly [A].
17. Release both two hooks [A] of the front glass holder [B] and rear glass holder [C] in the direction of
the arrow and detach them.
18. Detach the CIS glass [D] and the front spacer [E] and rear spacer [F] from the CIS assembly [G].
Since the front and rear spacers are not fixed, take care not to lose them.
Check the position of black marking for the distinction of the front / back side of the glass.
Also, make sure not to touch the glass surface.
If it is dirty, wipe it off with a dry cloth.
19. Detach the CIS [A] in the direction of the arrow.
Take care not to lose two springs [B].
To Next Page
Loading...
