Ricoh IM 550F

5.System Maintenance
486
Situations in which the machine is determined to be in use
No.
Situations in which the machine is determined to be in use
1
When the operation panel is used within 30 seconds
2
During firmware update
3
While firmware update is disabled
4
While printing (copy, printer, fax, re-printing via network)
5
While scanning (copy, scanner, fax)
6
Retrieving image data via the network
7
While initial setting ([Settings] icon) or SP is being set
8
While fax is transferring data
9
During on-hook/on the handset
10
During the PC-FAX process (from PC to machine data transfer to the end of the job)
11
While switching to/from the energy saving mode
12
When not being able to run the firmware update due to the modules that are running
e.g.) Waiting for DCS transfer (refer to appendix), accessing devices such as HDD/SD card,
etc.
13
While displaying a preview
14
While the document server function is in use
15
Connecting to TWAIN
16
During the interrupt copy process
17
While displaying the printer menu
18
While updating the display for the document server function via WIM or for stored fax
documents
19
While writing log information
20
While accessing the address book
21
During SC
22
While shutting down