5.System Maintenance
517
error log entry, then contact your supervisor.
A file import was attempted between
different models or machines with
different device configurations.
Import files exported from the same model
with the same device configurations.
Failed to write the device information
to the destination device.
Check whether the destination device is
operating normally.
An unexpected error occurred during
import or export.
Switch the power off and then back on,
and then try the operation again. If the
error persists, contact your supervisor.
The available storage space on the
external medium is insufficient.
Execute the operation again after making
sure there is enough storage space.
Failed to write or read the log file.
Check whether the path to the folder for
storing the file or the folder in which the
file is stored is missing.
Failed to import some settings.
The reason for the failure is logged in
"NgCode". Check the code.
Reason for the Error (Ng-Name)
2. INVALID VALUE
The specified value exceeds the allowable
range.
3. PERMISSION ERROR
The permission to edit the setting is
missing.
4. NOT EXIST
The setting does not exist in the system.
5. INTERLOCK ERROR
The setting cannot be changed because
of the system status or interlocking with
other specified settings.
6. OTHER ERROR
The setting cannot be changed for some
other reason.
Failed to import the file because it is in
the wrong format in the external
medium.
Check whether the file format is correct.
The import file should be a CSV file.
The encryption key is not valid.
Use the correct encryption key.
To Next Page
Loading...
