5.System Maintenance
521
P 800/801
4. Turn ON the main power.
5. Enter the SP mode.
6. Execute SP5-846-052 (Restore All Addr Book).
7. Exit the SP mode, and then turn OFF the main power.
8. Remove the SD card from the SD Card Slot 2 (lower).
9. Reassemble the machine.
• The counter in the user code information is initialized after uploading.
• The information of an administrator and supervisor cannot be downloaded or uploaded.
• If there is no data of address book information in the SD card, an error message is displayed.
To Next Page
Loading...
