Ricoh IM 550F

5.System Maintenance
527
No.
Pattern
No.
Pattern
0
None
12
Independent Pattern (2 dots)
1
Vertical Line (1 dot)
13
Independent Pattern (4dot)
2
Vertical Line (2 dots)
14
Trimming Area
3
Horizontal Line (1 dot)
15
Hound's Tooth Check (Horizontal)
4
Horizontal Line (2 dots)
16
Hound's Tooth Check (Vertical)
5
Grid Vertical Line
17
Black Band (Horizontal)
6
Grid Horizontal Line
18
Black Band (Vertical)
7
Grid Pattern Small
19
Checker Flag Pattern
8
Grid Pattern Large
20
Grayscale (Vertical)
9
Argyle Pattern Small
21
Grayscale (Horizontal)
10
Argyle Pattern Large
22
Two Beam Density Pattern
11
Independent Pattern (1 dot)
23
Full Dot Pattern
3. To change the density of the test pattern, select the density with SP2-109-006.
• If select "0" with SP2-109-006, the color adjusted so will not show up in the test pattern.
4. Enter SP5-990-001, and then press [EXECUTE] to start printing the test pattern.
5. Check the test pattern.
6. Exit SP mode.