[0 to 1/0/1]
0: OFF
1: ON (Lowers the fusing temperature for the first
three sheets of a job by 5 °C.)
When printing 1P/J jobs at short
intervals, the fusing roller becomes hot,
causing the coating to deteriorate,
leading to shortened fusing roller life.
Activating this SP lowers the fusing
temperature for the first three sheets of
a job, which prevents the coating from
deteriorating.
When both this SP and SP1-892-001
(Pressure Roller Dirt control) are set at
the same time, SP1-892-001 (Pressure
Roller Dirt control has priority.
To Next Page
Loading...
