Rohde & Schwarz CMW 500 - WCDMA GUI Reference

R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 294
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:GSM:MEAS<i>:MEValuation:IQIMbalance?
READ:GSM:MEAS<i>:MEValuation:IQIMbalance?
Returns the I/Q imbalance measured in the "Measured Slot". In addition to the current
value statistical values are returned (average, maximum and standard deviation).
Returned values
<Reliability>, Reliability indicator
<Current>,
<Average>,
<Maximum>,
Range: -100 dB to 0 dB
Def. unit: dB
<Std Dev> Range: 0 dB to 50 dB
Def. unit: dB
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:GSM:MEAS<i>:MEValuation:IQOFfset?
READ:GSM:MEAS<i>:MEValuation:IQOFfset?
Returns the I/Q origin offset measured in the "Measured Slot". In addition to the current
value statistical values are returned (average, maximum and standard deviation).
Returned values
<Reliability>, Reliability indicator
<Current>,
<Average>,
<Maximum>,
Range: -100 dB to 0 dB
Def. unit: dB
<Std Dev> Range: 0 dB to 50 dB
Def. unit: dB
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
深圳德标仪器 135-1095-0799